Motion linking
Sebastien Gouin-Davis avatar
Written by Sebastien Gouin-Davis
Updated over a week ago

Production release: June 2019

The motion link setting enables users to adopt (link) the occupancy scenes from an adjacent location to optimize the use of sensors and/or improve fault tolerance.

Create a Motion Link

1. In the Amatis App, select the location you'd like to add an occupancy scene to from a different location.

Screen_Shot_2019-08-13_at_2.42.57_PM.png
Screen_Shot_2019-08-13_at_2.33.30_PM.png

In this example, the Main Area is leveraging the occupancy scene from the Entry Area, so that when occupancy is detected in the Entry Area, it will also be triggered in the Main Area, but not vice versa.

3. Perform a sync for your changes to take effect.

Did this answer your question?