Avatar

Alison Accavitti

  • Total activity 153
  • Last activity
  • Member since
  • Following 0 users
  • Followed by 0 users
  • Votes 3
  • Subscriptions 91

Activity overview

Latest activity by Alison Accavitti
  • Avatar

    Alison Accavitti created a post,

  • Avatar

    Alison Accavitti created an article,

    Configure a mesh network

    A successful installation of Amatis devices is defined as the physical install of Amatis devices at the physical site. Follow the installation to commission your Amatis mesh network, which first re...

  • Avatar

    Alison Accavitti created an article,

    DLC cybersecurity requirements

    In version 4 (released June 2019), of the Design Lights Consortium (DLC) lighting controls application, the Cybersecurity section requirements are as follows: Definition: The compliance with a cybe...

  • Avatar

    Alison Accavitti created an article,

    California SB-327: IoT cybersecurity law

    California was the first state to establish a cybersecurity law covering "smart" devices. The bill, SB-327 Information privacy: connected devices, was introduced in 2017 and passed in the state sen...

  • Avatar

    Alison Accavitti created an article,

    Demand response

    Applying the 'Demand Response' template to a location will create two scenes that are used for Automated Demand Response (ADR) support. Clicking on these scenes allows the ADR test to be run and de...

  • Avatar

    Alison Accavitti created an article,

    Real-time schematics

    You can monitor occupant activity in a reflected ceiling plan format with device placement using the Real-time Schematics feature in the Amatis Dashboard. Upload your site floor plan  Label device...

  • Avatar

    Alison Accavitti created an article,

    Connectivity alerts in the Dashboard

    Within the top bar of the dashboard and the Amatis App Config table, via devices indicator lights, you will be able to check the cloud connectivity status of your site. Data for those devices will ...

  • Avatar

    Alison Accavitti created an article,

    Graphing data

    You can monitor lighting energy and controls savings using the graphing feature in the Amatis Dashboard. The Lighting Energy graph shows your baseline energy compared to energy used in bar chart f...

  • Avatar

    Alison Accavitti created an article,

    Getting started with the Amatis Dashboard

    After commissioning is complete and your Amatis lighting controls site is operational, you can set your Amatis Dashboard to monitor energy savings and system data. Monitor occupancy rates, light le...

  • Avatar

    Alison Accavitti created an article,

    Motion linking

    Production release: June 2019 The motion link setting enables users to adopt (link) the occupancy scenes from an adjacent location to optimize the use of sensors and/or improve fault tolerance.   C...