LUUM.IO

OFFICE - EXAMPLE LAYOUT#

Layout#

Office Example

Smaller, more subdivided spaces typically are optimized for maximum controls density and circuit level control. Lower power fixtures are daisy chained to consume the entire power budget of an X-PoE port. In the above scenario, one X-PoE port provides power to the low power LED fixtures, while another X-PoE port provides power to the 3rd party wireless controls system via a standard IEEE PD. The X-PoE lighting controller is housed remotely, along with it's power supply, and the 3rd party control system host. The X-PoE lighting controls system is integrated with the 3rd party control system via API and/or MQTT.

Fixtures#

3rd party 36V 275mA LED fixtures are daisy chained, up to 2.3A. For more information, see D1.2 - Output Power Range.
Multiple fixtures/X-PoE port, utilizing 2 channel X-PoE PD:

sequenceDiagram
  X-PoE Lighting Controller->>X-PoE PD 1: Cat5e-6 Cable
  X-PoE PD 1-->>LED Fixture 1: Channel 1
  X-PoE PD 1->>X-PoE PD 2: Cat5e-6 Cable
  X-PoE PD 2-->>LED Fixture 2: Channel 2
  box Head End
    participant X-PoE Lighting Controller
    end
  box Low Power LED Fixture
    participant X-PoE PD 1
    participant LED Fixture 1
    end
    box Low Power LED Fixture
    participant X-PoE PD 2
    participant LED Fixture 2
    end

Fixtures are distributed amongst 2 channels.

Although the Luum switch supports 2.3A max/port, two channel ports support a maximum of 1.15A each. In this example, the fixtures are split amongst the two channels to distribute the load.

Controls#

3rd party wireless lighting controls system, integrated with X-PoE. For more information, see D6.1 - Integration.
24V power bus to devices from standard IEEE PoE PD:

sequenceDiagram
  X-PoE Lighting Controller->>IEEE PD: Cat5e-6 Cable
  IEEE PD-->>3rd Party Host: 24V DC
  IEEE PD-->>3rd Party Switch: 24V DC
  3rd Party Switch-->>3rd Party Sensor: 24V DC
  box Head End
    participant X-PoE Lighting Controller
    participant IEEE PD
    participant 3rd Party Host
    end
  box 3rd Party Controls
    participant 3rd Party Switch
    participant 3rd Party Sensor
    end

System Components#

Qty	Description	Vendor	Part Number
8	3rd Party LED Light Fixtures X-PoE PDs	n/a Luum.io	n/a XPD-P2H-G (enclosed PD)
n/a	3rd Party Wireless Control System (motion sensors, switches, wireless gateway (not shown))	n/a	n/a
1	Standard IEEE PoE to 24V PD (not shown)	n/a	n/a
1	8 Port X-PoE Lighting Controller Power Supply (not shown)	Luum.io n/a	XS-108H (power supply not included)