Skip to content



Product Image

Product Overview#

The X-PoE device serves as a trigger for the X-PoE lighting controller enabling users or other systems with a cost-effective way to trigger different scenes. The XWD-KIT-RS takes the RJ45 connection from an X-PoE port and converts it to one or two separate input channels, each with a pair of conductors that can be used for a dry contact connector, or as it is shipped, connected to a toggle switch for simple on/off control. The XWD-KIT-RS system comes with a surface mount box and Decora-style switch but can be configured to fit into any design plan.


XWD-KIT-RS is cost optimized, occassionally it may take as long as one second to activate the scene being called by the switch. For timing critical applications please use XPD-T2IP-G.


Dimensions 127 mm x 57.2 mm x 76.2 mm
(5 in x 2.2 in x 3 in)
Weight 0.18 kg
(0.4 lbs)
Interfaces (1) RJ45 X-PoE Input
(1) Decora Switch
Power Input 48VDC to 57VDC Input From X-PoE Port3
Color White
Environment Operating Temp: 0°C to +40°C (32 to 104°F)
Storage Temp: -20 to +40°C (-4 to +158°F)
Humidity: 10% to 90% (non-condensing)
Warranty 5 Years

Front Panel#

The XWD-KIT-RS front panel is shown below:

Front Panel

  1. X-PoE Decora Switch

Top Panel#

The XWD-KIT-RS rear panel is shown below:

Rear Panel

  1. RJ45 X-PoE Input Port

  1. XWD-KIT-RS is a kit, with Decora switch, dry contact PD face plate, and jbox. Other configurations are available 

  2. XWD-KIT-RS is cost optimized to control scenes that do not require precises timing (load shed, day mode, night mode), for timing critical applications please use XPD-IP 

  3. PD must be powered by an X-PoE lighting controller.