Skip to content

LUUM.IO

XWD-SENSOR-3 - DATA SHEET#

Product Image

Product Overview#

The Sensor-3 fits inside a fixture with a 1 1/4" knockout, and serves as a trigger for the X-PoE lighting controller providing a cost-effective way to add motion control to an X-PoE project. This wired sensor provides occupancy and vacancy information enabling occupancy control with adjustable timeout period (changed from the Luum.io configuration software).

Note

For projects requiring daylight harvest, or temperature and humidity data, please use XPD-T2IP-G, or XWD-SENSOR-1

Specifications#

XWD-SENSOR-3 SPECIFICATIONS
Dimensions 57.2 mm x 42.9 mm x 38.1 mm
(2.3 in x 1.7 in x 1.3 in)
Weight 0.05 kg
(0.1 lbs)
Interfaces (2) Polarity correcting wires
Power Input 6-32VDC Input from buck converter1
Color White
Environment Operating Temp: -28°C to +37°C (-20 to 100°F)
Humidity: 10% to 90% (non-condensing)
Warranty 5 Years

Wiring Diagram#

The XWD-SENSOR-3 wiring diagram is shown below:

Wiring Diagram

Note

A buck converter with a 6-32V output must be used if supply voltage is >30VDC

  1. PD must be powered by an X-PoE lighting controller. ↩