Skip to content

LUUM.IO

XPD-P2HD-G - DATA SHEET#

Product Image

Product Overview#

The X-PoE powered device serves as an intermediary between the X-PoE port and the connected LED lights, DC-DC converters, or other compatible devices, enabling power transmission while supporting high power outputs. Like the original P2H-G, this PD takes the RJ45 connection from an X-PoE port and converts it into two separate output channels, each with a pair of positive (+) and negative (-) conductors.

The XPD-P2HD-G includes integrated backfeed protection diodes, making it ideal for use with inductive loads such as DC-DC converters or devices that could otherwise feed power back into the PD. This added protection helps prevent potential damage or disruption to the power system when daisy-chaining or using devices with capacitive or inductive energy storage.

The XPD is capable of delivering a total power output of up to 120W1, and can be daisy-chained to extend power delivery to additional fixtures or devices.

Confirm PD Configuration

The PDs can be utilized in both generic and customized configurations, tailored to accommodate specific load types. It is crucial to verify and install the appropriate PD before establishing a connection with an X-PoE lighting controller.

Specifications#

XPD-P2HD-G SPECIFICATIONS
Dimensions 45.5 mm x 22.3 mm x 40.7 mm
(1.8 in x 0.9 in x 1.6 in)
Weight 0.03 kg
(0.07 lbs)
Interfaces (1) RJ45 X-PoE Input Port
(1) RJ45 X-PoE Pass-Thru Port
(2) Individually Controlled X-PoE Lighting LED +/- Terminal Pairs2
Power Input 48VDC to 57VDC Input From X-PoE Port3
Maximum Power Consumption 120W (at 57VDC) With Both Channels Fully Loaded At 100%4
Environment Operating Temp: 0°C to +40°C (32 to 104°F)
Storage Temp: -20 to +40°C (-4 to +158°F)
Humidity: 10% to 90% (non-condensing)
Certifications ETL, Plenum
*Pending
Warranty 5 Years

Maximum Power Output

Maximum output power is dependant upon the input voltage and the forward voltage of the connected light engine.

Front Panel#

The XPD-P2HD-G front panel is shown below:

Front Panel

  1. X-PoE Power Input
  2. X-PoE Power Pass-Thru

Rear Panel#

The XPD-P2HD-G rear panel is shown below:

Rear Panel

  1. Channel 1 Output (+ / -)
  2. Channel 2 Output (+ / -)

Wire Gauge

The output connectors support 14 - 26 AWG wires.

  1. Maximum 120W per port with a 57V input, see D1.2 - Output Power Range. ↩

  2. 2 channels per port, 67W per channel with a 57V input. ↩

  3. PD must be powered by an X-PoE lighting controller. ↩

  4. X-PoE port must be configured properly. ↩